Vinyl Fence Company in Abilene, TX (Who Actually Call You Back)
A fence that keeps its color, with rails that have room to move.
✔ Free on-site estimates
✔ On-site from start to finish
✔ Priority warranty scheduling
Open Monday to Saturday, 7am-7pm
Get Your Free Fence Estimate
Vinyl Fence Installation in Abilene
A vinyl fence gives you privacy without paint, stain or sealer. It keeps a clean look for years and washes off with a hose. It suits a backyard, a front yard or a drive-side boundary. Pick the style once, and most of the upkeep is done.
At Everock Fencing in Abilene, TX, we install vinyl fence across Taylor County, including Merkel and Tye. We set the posts in concrete and give every rail room to move. You get a fence that stays straight through the heat.
Why Some Vinyl Fences Bow and Gap
You want a fence that needs no paint and stays clean. Vinyl moves with the heat. Rails locked tight in the posts bow in summer and pull loose when it cools.
We leave room in every rail connection, so the panels move and still sit straight.
Vinyl Fence Benefits for Abilene Homes
No stain, no sealer, no repaint.
Spend your weekends in the yard, not on the fence. The color runs through the material, so you skip the stain, the sealer and the repaint. Panels sit in rails with room to move in the sun.
Privacy that stays closed.
The view stays blocked day after day. Privacy panels lock together edge to edge, so there are no gaps to open up. Boards can shrink as they dry and open gaps, and vinyl panels do not.
A wash is the whole routine.
Cleaning stays simple. Dirt, dust and pollen rinse off with a hose. A soft brush and mild soap handle the stubborn spots.
A clean line along the street.
Your fence looks planned and finished from the street. Panels and rails run level and match from post to post. Every panel comes from the same set, so color and shape match along the run.
Services That Go With a Vinyl Fence
Room to Move in the West Texas Sun
Vinyl grows when it warms and shrinks when it cools. West Texas swings from hot afternoons to cooler nights, so a vinyl rail moves every day. A rail jammed tight into a post has nowhere to go. It buckles, pushes a panel out of line and stays crooked.
We build for the movement. Every rail seats into its post with a gap that lets it slide. We keep panels level as we go and check each run against a string line. You get a fence that looks as straight in August as it did on the day it went up.
What Happens After You Get In Touch
Three steps, in this order. Nothing is hidden, and nothing starts until you approve the plan.
- You get in touch. Send the short form or call. We can call you back and ask a few questions first, so we know what you want to fence and where. Estimates are always free.
- We visit and quote in person. We walk your lot with you, measure each run and mark the gate spots. You choose the style, the height and the finish, and you see the itemized quote on site.
- We build, you approve. We check the layout against Abilene’s height and setback rules and request the Texas811 locate. Then we set the posts in concrete and let them cure. Rails with room to move and panels follow, then caps and gates, and we tidy the work area when we finish.
What the Job Covers From Start to Finish
Layout with you. We walk your lot, measure each run and mark the gate spots before any hole is dug.
Rules and lines. We check the layout against Abilene’s height and setback rules and request the Texas811 locate. That call does not mark private lines such as sprinklers, so you point those out on the visit.
Posts and footings. Posts go in concrete and cure before the panels go on. Gate posts are reinforced for the weight of the gate.
Rails and panels. Rails sit in the posts with room to expand and shrink. Privacy, picket and ranch rail styles come in a choice of colors.
Caps and gates. Caps go on, then the gates.
Three Vinyl Styles, Three Jobs
Vinyl comes in a few shapes, and each one answers a different need. Choose by how much you want to hide and how much you want to see.
Privacy where you want it.
Solid panels close the view from top to bottom. They suit side and rear lines, pools of shade and pet yards.
Picket.
A low, open style with a classic shape. It marks a front yard without walling off the house, and it reaches higher at the street than a solid fence can.
Ranch rail.
Two or three wide rails between posts. It outlines acreage, a long driveway or a pasture edge and lets the view run free.
Color.
Color choices vary by style, and we go through them at your estimate so you see them against the house.
Vinyl lasts because the color runs through the panel, so a scratch does not show bare material. The posts carry the load, the rails hold the shape and the caps keep water out of the tops.
Panels and Rails That Hold Their Color
A vinyl fence is a set of parts that fit together, and each one has a job. Everock Fencing picks every part for the load and the weather it will face.
Posts.
They hold the whole fence in place. We set them in concrete footings sized to the height and the ground.
Rails.
They tie the posts together and carry the panels. We seat them with room for movement at both ends.
Panels.
Privacy panels interlock, picket sections hang in a line and rail sections run level. We check each for square before it goes on.
Post caps.
A cap keeps water and dust out of the post and gives the top a finished edge.
Gates and hardware.
Gates move more than anything else on the fence. We hang them on heavy hinges with a latch that lines up, and we stiffen the gate posts for the weight.
Abilene Rules to Settle Before the First Panel
Two city offices matter for a vinyl fence. Planning & Development Services answers placement questions, and Code Compliance looks at upkeep.
Privacy where you want it.
Solid panels count as an opaque fence. The cap is 2½ feet at the front property line, and the fence may then taper up to 7 feet at the front building line. Sides and rear can reach 7 feet.
A view kept at the street.
See-through styles get a higher cap at the street, 4 feet along the front property line.
A clean setback.
The fence line must clear 10 feet from the curb or pavement edge and stay off public right-of-way.
Paperwork that stays small.
Up to 7 feet, no building permit is needed. Above that, the city also asks for a variance.
Lines marked before the first hole.
The Texas811 request goes in two working days ahead of the first hole. Holidays do not count, and public lines are marked at no charge.
HOA rules sorted early.
Check any HOA color and height limits first. We go through them with you.
Your lot decides the rules.
Past the city limits, your town or county sets the rules, so the layout starts with where your lot sits.
Quick Habits That Keep Panels Clean
You can keep your vinyl fence looking new with a hose and a few minutes. These habits protect the finish you chose.
Rinse it a few times a year.
A garden hose clears dust, pollen and spider webs.
Spot clean with mild soap.
Use a soft brush on marks and scuffs. Skip harsh cleaners that dull the finish.
Keep trimmers back.
String trimmers nick vinyl at the base. Leave a few inches of space when you edge.
Check the rails and gate.
Look at the rail seats and the latch after big storms. Tighten loose gate hardware at the first sign.
Trim climbing plants.
Vines hold moisture against the panels and add weight to the rails.
Vinyl Fence Installation in Abilene and the Towns Around It
You get the same visit whether your lot is in Abilene or out toward Tye, Merkel, Buffalo Gap, Hawley or Clyde. Tell us where the lot sits, and we start with the rules for that address.
Where a Vinyl Fence Quote Comes From
Style sets the first part of the price, because privacy panels use more material than picket or rail. Length and height come next. After that the site decides: slope, hard digging, the number of gates, and any old fence that has to come out first.
Estimates are always free. Quoting in person is the preferred way, because the measurements, the ground and the gate openings are all visible on site.
The visit is free and shows you the whole job. Have three things ready: where your line is, which style you like and where the gates go.
Vinyl Next to Wood and Aluminum
| What matters | Vinyl | Wood | Aluminum |
|---|---|---|---|
| Upkeep | Wash when dirty | Stain and sealer on a schedule | Rinse, check the finish |
| Privacy | Full with privacy panels | Full with board on board | Open, little cover |
| Heat | Needs expansion room | Dries and fades without a finish | Metal holds its shape |
| Repair | Replace a damaged panel | Replace boards or rails | Replace a section |
| Look | Clean, one color | Natural, stain in many shades | Slim, ornamental |
| Best for | Low upkeep and privacy | A natural look you restain | Open views and curb appeal |
Pick vinyl for privacy with the least upkeep. Pick wood when you want a natural look you can restain. See the wood fence installation page for the full picture.
After the Last Panel Goes In
Style, color, height and gate spots get your sign-off before we dig. From there, the build is ours to get right.
After we build your fence, any fix goes to the front of the schedule. You’re booked first. If the problem is the installation, we fix it.
FAQs
How tall can a vinyl fence be in Abilene?
Along the sides and rear it can reach 7 feet. At the front property line, solid privacy panels stop at 2½ feet and open picket or rail stops at 4 feet.
Does vinyl hold up to Abilene heat?
Yes, when the rails have room to move. We seat every rail with an expansion gap, so the panels stay in line as the temperature changes.
Do I need a permit for a vinyl fence?
Not for a fence of 7 feet or less that meets the setbacks. Over 7 feet, a permit and a variance are required.
Can vinyl fade?
Color runs through the panel, so it wears evenly. A rinse a few times a year keeps it clean.
Can I fix one broken panel?
Yes. A panel comes out and a new one goes in, and the rest of the run stays as it is.
How far from the street does the fence have to sit?
At least 10 feet from the curb or pavement edge, and outside the public right-of-way.
Who calls before digging?
We do. Texas811 wants two working days of notice, holidays not counted, and marking public lines costs you nothing.
Do you build outside the Abilene city limits?
Yes. We build across Taylor County. The town or county where your lot sits sets the rules there, and we check them before the build.
Do you charge for estimates?
No. Estimates are always free, and quoting in person is preferred.
Choose the Style With Your Lot in View
Walk your lot with us and see the vinyl styles against your house. We measure the runs, mark the gates and talk through the color and the height. The estimate costs nothing, and you leave with a clear plan.
Other Fences We Build
Fence Types
